宏发彩票官网

Location:HOME > NEWS > Anti cracking technology of stainless steel cap

Anti cracking technology of stainless steel cap

2020-07-15 10:12:41   COMMENT:0 HITS:
  The production of large and small stainless steel cap is basically based on pressing, but the process of pressing will make the hardness and density of steel increase. However, if it is not heated, cracks will easily occur.

宏发彩票官网  For the control of reducing range, in general, the first processing range of stainless steel is within the first level. For example, 325-159 stainless steel large and small caps need several times of heating treatment. First, one end of 325 pipe is pressed, and 325 hole diameter is pressed to 273. This pressing also needs to be heated, and the second time is 273 diameter changing 219 process, which is the same The tube needs to be heated to the specified temperature and then pressed. Then there is the process from 219 to 159, and each reduction requires heat treatment.

宏发彩票官网  All kinds of materials have their own hardness and tensile strength, so the pressing force of each material is also different. For the same type of stainless steel cap, the material is different, and the processing methods and procedures are also very different. For example, the stainless steel reducer of ordinary carbon steel will be formed after three times of heat treatment, but the hardness of stainless steel reducer made of alloy material is higher The more times of pressing and heating, the more complex the forming process.

previous_pageWhat are the components of stainless steel tee?
next_pageWhat is the difference between national standard flange and non-standard flange

<ALL>
鑫乐博彩票平台 即发彩票注册 河北福彩网 亿博彩票平台 辽宁福彩网 六分彩票官网 牛逼彩票导航 彩票365网址